Ceramic adhesive mortar is distinguished based on the type of ceramic to be used and the installation technique. The mortar consists of ordinary ceramic adhesive mortar, homogeneous tile adhesive, and ceramic adhesive on ceramic.

Aplus 10 Tile Adhesive
Aplus 10 Tile Adhesive is a ceramic adhesive used to glue ordinary ceramics. This adhesive can be used for tile applications. It is easy to apply because it is mixed with water, prevents the ceramic from lifting or popping, and has a plastic mixture. The mixing begins by pouring 5-6 liters of water into a container for mixing 25 kg of Aplus 10 Tile Adhesive. Then add the mortar and stir with a hand mixer. Once smooth, the mortar is ready to be applied to the area where the ceramic will be installed.

Aplus 33 Tile Adhesive
Aplus 33 Tile Adhesive is a ceramic adhesive used to glue homogeneous tiles. In addition, this mortar is suitable for installing terrazzo, marble, and natural stone. This ceramic adhesive is easy to apply because it only requires water, is resistant to expansion and shrinkage, prevents ceramics from lifting or popping, and has a plastic mixture. The mixing method is to mix the Aplus 33 Tile Adhesive mortar (25 kg) with 5-6 liters of water. Then stir with a hand mixer. Then apply the mortar to the area where the ceramic will be installed.

Aplus 88 Tile on Tile Adhesive
Aplus 88 Tile on Tile Adhesive is an adhesive to glue ceramics on top of ceramics. This mortar makes it easy to install ceramics because there is no need to dismantle the old ceramics before installation. This adhesive can be applied to install ceramics on top of ceramics, on floors, and on walls. Aplus 88 Tile on Tile Adhesive mortar can be applied to homogeneous tiles, marble, and natural stone. In addition, this mortar can be applied to dry, wet, and dampened areas. Mix the Aplus 88 Tile on Tile Adhesive (25 kg) with 5-6 liters of water. Then stir until evenly mixed using a hand mixer. After that, the mortar can be applied to the area where the ceramics will be installed.

–sh